8 Tips For Rewiring a House | Elcolem- Electrical Contractor

With enhanced electrical needs, the load of electricity consumed by a home is increasing drastically. Use of computers, ovens, Ac's and refrigerators are compelling homeowners to get their home rewired, to increase the electrical capacity.  Many old and historic residences lacks high voltage power outlets and are in great need of electrical replacements. Therefore, getting old electrical wiring systems upgraded from licensed electrical contractors Toronto is a must.

Few tips for safe rewiring process are:
1. Do an electrical inventory : Before starting the process, create a list of all major electrical appliances and devices that you usually use. The new electrical system should be capable of matching all your needs.

2. Check the local codes and permits : There are codes that set the standards for everything, comprising the number of electric outlets to the kind of wiring material used. Before rewiring, its crucial to get the permits.

3. Decide the use of wires : Its important to declare the use, you'll make of the electrical terminals. Since modern wiring not just carries electricity, it can be well utilized for electrical, data and wireless security. Therefore, it is an all-in-one wiring which is comparatively cheaper.

4. Inspect the existing infrastructure : To avoid any damage to home infrastructure, its crucial to inspect it thoroughly. This step should always be taken as the top most priority. A professional electrician follows the credo of “Inspect twice, drill once”.

5. Always put things in writing : Since the structure of an old building is quite complex, it can be full of surprises. They are not at all flexible. Therefore, perform the digging job carefully. To prevent any infrastructure damage, get a written agreement from the electrical company.

6. Find an expert electrician :  Since old monuments needs to be handled with care, electrical repairs should be done by an experienced Toronto electrician. They well understands the way of performing complex job in an easy way.

7. Demolition and reconstruction :  This process should be an integral part of the job. If you are ignoring the damages done by rewiring, you are waiting for an approaching trouble. Clean and restore all the holes and punches, as soon as the job is over.

8. Integrate historic switches and plates : To avoid any old and new mismatch, use switches and electric panels that offers a historic look and feel. Many electrical companies manufacture hardware that can match the appearance of almost any period whether present or ancient.

These are the few tips which needs to be considered while rewiring an old home. Elcolem is a trusted electrical company in Toronto that offers wide range of electrical installation, maintenance and emergency repair services to both residential and commercial clients at affordable prices.