4 Common Ways To Avoid Electrical Problems In Winter

Winter is a joyous season in which one can enjoy holidays, festivities, mild weather and snow. With so many reasons to be happy, this season brings a little of inconvenience and discomfort too. Due to prolonged snow and frequent hailstorms, the chances of structural damages and electrical issues are on a high rise.

Most possibly, the ventilation and insulation of a home deteriorates in the cold weather. Therefore, the risks of power outages, blowouts and consumption increases. To stay safe and stress free, its important to remain aware of the issues that may arise in winters. In case, you are already dealing with an electrical damage, call a trusted emergency electrician in Toronto for prompt and efficient repairs.

Few of the electric problematic areas are :

1. Breaker blow-out and panel problems   :   Winter is the only season that involves the highest power consumption, due to the prolonged use of heaters and furnaces. People have also included the use of space heaters and electric blankets in their list of electronic appliances. This increased power load often results in frequent breaker blowouts or trips and problems like flickering of lights etc.. These are the signs that point out the need for electricity repairs.

2. Outdated equipment   :   Since winter appliances are used after a pause of time, one needs to inspect the plugs ins thoroughly before putting them inside the socket. Due to modern equipment and panels, several outdated electrical equipment may turn up to be incompatible for use. Their use may cause serious fire hazards or residential wiring damage. Avoid using electrical tools that are more than five years old.

3. Power consuming space heaters   :    To increase the warmth inside a home, one can use electric space heaters. These are handy equipment that can make a person survive in extreme of cold. Though this appliance offer many worthy benefits, it can be blamed for increased power consumption and high energy bills. Consult your Toronto home electrician to know about the energy efficient heater categories available in market, to prevent high bills.

4. Power outages   :  Power outages are highly experienced in winters due to frequent storms and snowy climate. hire electrical specialists or local electrical contractors to provide a power back up facility to your home and office through generator installation in Toronto.

These were the few common electricity problems that are witnessed during the winters. Elcolem is a reputed electrical company in Toronto that offers top-notch electric panel installation, lighting installation and electronic wiring repair and inspection service for both residential and commercial spaces at reasonable prices.

6 Ways To Avoid Electrical Hazards

Electricity is the other name for danger. About thousands of fatal accidents occur due to currents and high voltages. If you are trying to deal with electrical repairs on your own, beware of the consequences. Only professional electricians in Toronto can work and manage these dangerous outlets and wires.

Whether its homes, parks, malls etc., electricity and electrical gadgets are everywhere. The only reason that our life is so comfortable, is due to these inventions as they offer many marvellous benefits. To avoid any dangers or hazards, its crucial to remain on the safe side, while dealing with these gadgets.

Few things to keep in mind are :

1. Install certified products  :  Its important to purchase and install certified and tested electronic goods. They are designed to last longer, that too without any repairs. Moreover, for enhanced safety, call licensed electrical contractors to install, repair and dismantle residential wiring.

2. Always plug into a GFCI  :  Ground Fault Circuit Interrupter (GFCI) protection is greatly required, if one is working with temporary electrical supplies. Grounding helps in preventing high electric shocks. Do make sure that your home is installed with GFCI receptacles.

3. Check each extension cord  :  Extension cords are prone to damage, crack or tear with time and irresponsible usage. Do inspect the cables to check, whether they are intact and insulated. The power extension cables should not be knotted, as it increases the risk for fires and conductor damage.

4. Inspect the power tools regularly  :  Carefully look over the power cords, plugs and outlets for any signs of damage. If there is excess of wear and tear, get the elements properly repaired. Moreover, if you notice any smoke, over heating or burning smell, switch off the main electrical circuit board and discontinue all usages.

5. Never modify electrical plugs  :  Many of the homeowners, file down the switch blades, remove the ground pins, or modify electrical plugs, so that they can fit well into a socket. This action can increase the risk of shocks, electrocution, and fire. If any gadget plug doesn't fit the ground outlets, get it replaced by a certified electrician.

6. Keep all electrical components dry  :  Water is a good conductor of current and for sake of electrical safety, its never advised to mix the two. Wet power tools, cables, outdoor receptacles and outlets can cause short circuits, electrocuted home or even fires. Therefore, avoid installing or storing these components in outside or wet environment.

These were the few ways or precautions that can help in preventing electrical hazards or short circuits. Elcolem is a trusted electrical company in Toronto that offers wide range of emergency electrical installation and repair services to both residential and commercial clients at reasonable prices.

8 Tips For Rewiring a House | Elcolem- Electrical Contractor

With enhanced electrical needs, the load of electricity consumed by a home is increasing drastically. Use of computers, ovens, Ac's and refrigerators are compelling homeowners to get their home rewired, to increase the electrical capacity.  Many old and historic residences lacks high voltage power outlets and are in great need of electrical replacements. Therefore, getting old electrical wiring systems upgraded from licensed electrical contractors Toronto is a must.

Few tips for safe rewiring process are:
1. Do an electrical inventory : Before starting the process, create a list of all major electrical appliances and devices that you usually use. The new electrical system should be capable of matching all your needs.

2. Check the local codes and permits : There are codes that set the standards for everything, comprising the number of electric outlets to the kind of wiring material used. Before rewiring, its crucial to get the permits.

3. Decide the use of wires : Its important to declare the use, you'll make of the electrical terminals. Since modern wiring not just carries electricity, it can be well utilized for electrical, data and wireless security. Therefore, it is an all-in-one wiring which is comparatively cheaper.

4. Inspect the existing infrastructure : To avoid any damage to home infrastructure, its crucial to inspect it thoroughly. This step should always be taken as the top most priority. A professional electrician follows the credo of “Inspect twice, drill once”.

5. Always put things in writing : Since the structure of an old building is quite complex, it can be full of surprises. They are not at all flexible. Therefore, perform the digging job carefully. To prevent any infrastructure damage, get a written agreement from the electrical company.

6. Find an expert electrician :  Since old monuments needs to be handled with care, electrical repairs should be done by an experienced Toronto electrician. They well understands the way of performing complex job in an easy way.

7. Demolition and reconstruction :  This process should be an integral part of the job. If you are ignoring the damages done by rewiring, you are waiting for an approaching trouble. Clean and restore all the holes and punches, as soon as the job is over.

8. Integrate historic switches and plates : To avoid any old and new mismatch, use switches and electric panels that offers a historic look and feel. Many electrical companies manufacture hardware that can match the appearance of almost any period whether present or ancient.

These are the few tips which needs to be considered while rewiring an old home. Elcolem is a trusted electrical company in Toronto that offers wide range of electrical installation, maintenance and emergency repair services to both residential and commercial clients at affordable prices.

5 Top Reasons To Call a Professional Electrician - Elcolem

Electricity is considerably a power source that tempts various appliances and electric items to work automatically without any manual involvement. Though electricity acts as an efficient source of energy, its quite dangerous to touch it directly. Its always recommended to call a certified and licensed electrician Toronto for every electric installation. As in today's lifestyle, DIY solutions for every problem are followed by home-owners to avoid calling professionals. But it isn't right to follow the do-it-yourself electric practices, due to life safety measures. It would be wise to call upon an emergency electrician, in case any urgent repair comes up.

Few situations that need electric repairs are:

1. Smoking outlets :  An electric outlet consists of switches and sockets. If this outlet starts smoking, turn off the electric supply of a home urgently. This situation is very dangerous and can lead to a fire hazard. To act quickly, shut the circuit breaker and contact an electrician service immediately. In case, there are flames in the outlet, call the fire brigade and neighbors for help.

2. Exposed wires :  Exposed or naked electric wires are life threatening. Always keep a distance from them, especially the naked and high voltage ones. Don't offer DIY repair to such cables as they can be dangerous. Possibly, there are chances that live wires may spark which can give a bad shock. Therefore, whenever you notice an exposed wire or cable, immediately turn off the circuit breaker. Don't attempt any repair, until you are sure that the breaker you turned off is associated to the specific wire. Instead, call an electrician for effective repair.

3. Isolated power outage :  In major electrical issues, a home may lose its electricity power, while rest of the locality remains unaffected. Don't panic in such situations. Just check the main source of electric supply, turn it off and on again. If nothing happens, then hiring a 24 hours emergency electrician Toronto can save your day.
   
4. Wires in water :  Basement flooding or roof leakage can lead to a situation where wires may get wet or evenly sit in water. Follow the necessary precautions, as there is a great risk of electrocution. Keep your family members and children away from the spot and cut the power source of the home, until the wires dries up. If current or sparks still persists, call an electric contractor to look into the matter.

5. You feel unsafe or uncertain :  If the power voltage fluctuates frequently or your home electricity is coming and going, then you may not be in safe condition. Either there is something wrong or there will sooner be something wrong. Don’t wait for an incident to happen, call an electrician right away to ensure your family's safety.

These were the few problem areas which should be dealt by an electrician. Power is not a game, so don't ever try to experiment your life by offering DIY repairs. Elcolem is a leading electrical company that offers wide range of electric installation and inspection services including emergency repair solutions in Toronto.

What are the Benefits And Drawbacks Of Led Lights

You have various rooms in your house and every room is different and unique based on its structure and interior. LED light is the first choice of everyone to brighten the room. LED bulbs are a great source of less power consumption, high safety, high luminous efficiency, shock resistance and energy saving. You can use these lights anywhere in your house. These are available in small size and very convenient to use. These are a just few reasons why LED lights are more popular than CFL.

It does not matter how expensive interior you have and which type of lights you have, every expensive or cheap thing has drawbacks. No doubt, nowadays, LED technology is very popular, but it has some drawbacks. Toronto LED retrofit company share all advantages and disadvantages of it.

In this article you read about the advantages and drawbacks of LED lights.

 

Energy efficiency: They are the most efficient way of lighting. They produce more light than compact fluorescent bulbs. Traditional incandescent bulbs lost 80% electricity as heat.  Means traditional incandescent bulbs 80% heat your room, not a bright it. On the other hand, LED bulbs used only 20% energy to bright your room.

Environment friendly: LED bulbs are manufactured with free of toxic chemicals. Means it contains no mercury and other hazardous substances like mercury. Light emitting diode bulbs are 100% recyclable. Other bulbs contain hazardous substances that are harmful for our environment.

Long life: Long life span is the most important benefit of these bulbs. They have an outstanding life time up to 11 years of continuous operation. They are different from other traditional bulbs.

The highest price: Cost of per bulb is very high than other incandescent and fluorescent bulbs. When you will compare their price per lumen with other bulbs, you will find high price.

Quality of light: These bulbs have only limited light angle. They also create shadows.

Drivers: LED bulbs required constant DC Voltage to operate smoothly.These lights have not good electronic drivers, Designing an effective driver is the key to obtaining advantages of led bulbs.

Shift Colour: LED lights changes its colour due to age and temperature. These lights have two colour characteristics, which affect how light is perceived.

Finally, you got all the advantages and disadvantages of LED bulbs and now you know a light emitting bulb is different from other traditional bulbs.  Switch to LED lights and save your hard earned money. For more detail call us we are the leading electrical contractors in Toronto

The Easiest Ways To Save Energy When The Air Conditioner Is Must

Summer is the hottest season and it falls between spring and autumn. In this hot season electricity bill prices are rising. You can save your electricity cost by using some effective tips. Every year, many home-owners spend thousands of dollars on air conditioners to make their hot summer season cool. Air conditioner is a way to increase your electricity bill. Don’t take tension, you can stay cool in this hot season with some effective energy saving tips.

To keep your electricity bill as low as possible with given tips. Electrical contractors in Toronto help you to keep your bill low. You can easily save you hundreds of dollars on your electricity bills. So, if you are willing to save your hard earned money, take a look on these energy saving tips.

1. Don’t forget AC after set it: When you are coming from outside during the hot day, first you set the temperature of the air conditioner. It’s good, but sometimes you forget about it after turning it on. Set the desired temperature and when your room or living space, turning into cool, you can change the temperature of the air conditioner.

2. Clean the air filter: If you have dirty filters, it mitigates air conditioner’s cooling efficiency. Clean the air filter to make your AC more usable and energy efficient. Check HVAC system on a monthly basis. If you notice that you need a new air filter, change it with a new one.

3. Replace your air conditioner: It is good that you have an air conditioner in your house. But if it is taking too much time in cooling, it is the best that you replace it with a new one. When you think about to buy a new AC for your living space, remember efficiency matter. Buy an energy star air conditioner because it helps to reduce your electricity bill.

4. Get an annual inspection: Whether you have a central AC or window AC, annual checkup is must provide a long life to your air conditioner. You may not be able to inspect the AC. A professional knows how to diagnose it and if there is any problem, he can fix it. So, don’t waste your time and money, hire a professional to diagnose any problem.

5. Use ceiling fans: You and your family depend on the air conditioner to keep yourself cool. But, it does not mean that fan is a bad option. You can rely on fan because fans use less energy as compared to air conditioner.

If you have more than ten year old air conditioner, change it as soon as possible. Now, so many energy cost saving air conditioner available in the market. You can buy five star or three star ACs because these are energy saving. To know more about it, you can call us .

Six Tips To Reduce Electricity Bill Cost

Summer days are getting hotter. That’s why people turns on air conditioner to survive in these hot days. More use of air conditioner is the main cause of high electricity bill. Saving on electricity bill is always smart way to save your bucks. Less use of electricity will help to keep monthly bills way down.

Here are some tips that help you reduce the extra charges of your electricity bill. Electrical Contractors in Toronto help you to reduce your monthly bill.

1. Switch to LED and CFL: Compact fluorescent light (CFL) and light emitting diode (LED) both are the good choice to reduce monthly electricity bill. Don’t compare the price of LED and CFL bulbs with regular bulbs. It true that these type of bulbs are costly but the main fact is these bulbs help you to get low cost electricity bill. LED and CFL bulbs do not contain mercury that is why it’s not present any hazard to the environment and to you.

2. Use fans instead of air conditioner: As everyone know that summer days are very hot. Due to this, maximum people use air conditioner in their house and offices. But if possible, use fans instead of AC. You can use it more warmer days. It’s not compulsory that you run your air conditioner twenty four hours. Just run it few hours.

3. Mitigate electric appliances: Generally, everyone has juicer, mixer grinder, microwave, dishwasher, coffee grinder, food processor and many more electric home appliance. But, do you really need them? Ask this question to yourself. Now, gas powered appliances are available in the market. You can buy them because gas is cheaper than electricity.

4. Replace old electric appliances: Nowadays, every appliances manufacturing company produce five or seven star electric appliances. If you have old appliances in your house, you can replace them with new one. Because these five or seven star appliances energy saver.

5. Unplug unused electronics: Many people have this bad habit to keep things plugged for many hours such as mobile battery, computer, television, camera battery, DVD player and other electronic things. When you are not going to use these things, unplugged them.

6. Check refrigerator temperature: As per experts, the ideal temperature of refrigerator is between 35 degree and 40 degree. If you increase it, obviously your electricity bill will also increase. Keep your refrigerator full it helps to keep all food stuff cool. If you have full fridge and refrigerator, they do not have to work so hard to stay cool.

Saving electricity bill is very wallet friendly and cost effective. If you are fed up with high cost electricity bills, you can adopt these given tips. To know more about other electricity services, you can consult with Elcolem in Toronto.